Intelligent Leather Punching Machine for Precision & Value Addition

Published on: 09 Apr 2026

DY-SK-D2-10Z Intelligent Leather Punching Machine

The DY-SK-D2-10Z Intelligent Leather Punching Machine is designed for high-speed punching work where pattern flexibility, punching precision, and production efficiency are important. This model is positioned as an intelligent punching solution for leather processing, combining direct design input, automatic feeding, multi-axis working structure, and clean punching performance in one machine platform.

A major strength of the DY-SK-D2-10Z is that it supports drawing directly by AutoCAD and CorelDRAW without mold design. This gives the machine a more digital working approach for punching pattern creation. The product also emphasizes high-speed punching, easier plate change, lower power cost, high punching quality, and an auto dust collecting system that helps keep the work environment clean.

The machine is also listed as a two set ten axis high speed machine, with punching speed shown as (500–900) ×2 in the specification table and a feature line stating 500–1100 punches per minute. Along with this, the model includes 5 × 2 punch axis quantity, 3 × 2 rotating axis quantity, and a (600 × 900) ×2 punching range, showing that the machine is built for structured, high-speed punching work across a defined working area.

Key takeaways:

• The DY-SK-D2-10Z is an intelligent leather punching machine.
• It supports 500–1100 punches per minute according to the feature section.
• It allows drawing directly by AutoCAD and CorelDRAW without mold design.
• It features automatic feeding material and precise punching.
• It is described as having lower power cost and higher efficiency.
• It is designed for high-quality punching with no material damage, no material burning, and no bad smell.
• It includes an auto dust collecting system to help keep the work environment clean.

The DY-SK-D2-10Z is built around speed, digital pattern creation, and punching quality. Instead of presenting it as a general-purpose punching concept, the product sheet gives a much more focused picture: this is a leather punching machine intended for fast, repeatable perforation work with direct software-based drawing support, automatic feeding, and controlled punching performance.

Machine Overview

The model name is DY-SK-D2-10Z, and the product is identified as an intelligent leather punching machine. The specification table further describes it as a two set ten axis high speed machine. These two identifiers together establish the machine as a high-speed leather punching system with a structured axis layout and digitally controlled punching workflow.

From the machine page, the DY-SK-D2-10Z is presented not only as a perforation unit but as a machine intended for cleaner, more precise, and more production-oriented leather punching. Its machine body, control screen, and working table setup indicate a dedicated punching station designed around automated operation and repeated pattern work.

The product page visuals also show perforated leather surfaces and automotive-style interior pieces, which point clearly toward decorative and functional leather punching applications where finish quality and pattern regularity matter.

High-Speed Punching Performance

Speed is one of the machine’s most prominent product points. The feature section lists high speed, 500–1100 punches per minute. In the technical table, the punching speed is listed as (500–900) ×2. Together, these two speed references position the DY-SK-D2-10Z as a machine developed for fast punching work rather than slow manual or low-output processing.

The wording used on the machine page also links this speed to overall efficiency. It specifically highlights lower power cost and higher efficiency, which means the speed discussion is not presented in isolation. It is tied directly to production-oriented operation.

Because the machine is also described as a two set ten axis high speed machine, its speed profile is part of a wider machine architecture rather than just a single isolated specification line.

Design and Pattern Control

One of the clearest advantages of the DY-SK-D2-10Z is its direct software-based design workflow. The product page states that drawing can be done by AutoCAD and CorelDRAW directly, without mold design. This is an important functional point because it frames the machine as a more flexible and design-driven punching solution.

Instead of depending on a mold-design route, the machine is positioned around direct digital design input. That makes the machine more suitable for pattern-based punching work where design control and layout handling are central to the process.

This design flexibility is also reflected visually on the product page, where the sample outputs show different hole arrangements and perforated leather patterns rather than just one simple repeated punch style.

Feeding System and Punching Quality

The feature list states that the machine offers automatic feeding material and precise punching. These two points are central to how the DY-SK-D2-10Z is presented. The first relates to working convenience and production continuity, while the second relates directly to output quality.

The same feature list further emphasizes punching quality by stating high quality of punching, with no material damage, no material burning, and no bad smell. These are important quality statements because they describe the intended punching result not only in terms of speed, but also in terms of finish condition and material handling outcome.

Taken together, automatic feeding and these punching-quality statements present the DY-SK-D2-10Z as a machine built for clean leather punching rather than rough or heavily damaging perforation work.

Axis Configuration and Working Format

The technical table gives a more structured view of the machine’s mechanical format. It lists the DY-SK-D2-10Z as a two set ten axis high speed machine. It also specifies punch axis quantity: 5 × 2 and rotating axis quantity: 3 × 2.

These specification lines show that the machine is organized around a multi-axis punching arrangement rather than a simple single-direction punching setup. Even without adding assumptions beyond the table, the listed axis quantities clearly indicate a more advanced working structure.

This is one of the main reasons the machine should be presented professionally around its technical format rather than with generic wording. The 10Z page gives enough machine-structure information to support a strong technical presentation on its own.

Working Range and Material Capability

The DY-SK-D2-10Z has a listed punching range of (600 × 900) ×2. This range defines the machine’s working format and shows that it is built for sizable punching layouts rather than only small local punching operations.

The specification table also lists a diameter of hole range from 0.6 to 13 mm. This gives the machine a broad standard punching span for hole size selection. Along with that, the thickness of material is listed as 1–6 mm, which defines the intended processing thickness range.

These technical points are important because they turn the blog from general promotion into a machine-specific presentation. Hole-diameter range, material thickness range, and punching range are all concrete product data that directly strengthen the content.

Clean Operation and Dust Collection

The machine includes an auto dust collecting system to help keep the work environment clean. This is one of the six headline product features and should remain a visible part of the content because it directly reflects the machine page.

This clean-operation point also connects naturally with the machine’s punching-quality claims. A product page that highlights no material damage, no material burning, no bad smell, and auto dust collection is clearly presenting the DY-SK-D2-10Z as a cleaner punching solution in both output result and work environment management.

Visual Application Direction

The machine page includes three sample visuals beneath the feature list. These show a light-colored automotive-style interior component, a perforated leather sample, and another upholstered seating component. These visuals give useful application direction without needing unsupported industry claims.

Because these product visuals are shown together with the machine, they support describing the DY-SK-D2-10Z as a punching solution for patterned leather surfaces, perforated leather components, and upholstery-style leather applications. This remains aligned with what is actually visible on the product page.

Using the page visuals in this way is more accurate than adding large unsupported application lists. It keeps the content professional while still giving the reader a clear idea of the machine’s practical direction.

Technical Specifications

Model No.	DY-SK-D2-10Z
Function Introduction	Two set ten axis high speed machine
Punching Speed (punch / min)	(500~900) ×2
Punch Axis Quantity (PCS)	5 × 2
Rotating Axis Quantity (PCS)	3 × 2
Punching Range (mm)	(600 × 900) ×2
Diameter of Hole (mm)	0.6–13
Thickness of Material (mm)	1–6
Power	220V / 3.0Kw    380V / 3.0Kw
Supply Frequency (Hz)	50/60
Pressure Air (bar)	5–6
Weight of Machine (T)	Approx. 1.5
Size of Machine (mm)	2050 × 2000 × 1550

These specifications show that the DY-SK-D2-10Z is a structured high-speed leather punching machine with a defined punching range, a broad hole-diameter span, multi-axis layout, and machine dimensions suited to industrial punching work.

Frequently Asked Questions

What is the model name of this machine?

The model name is DY-SK-D2-10Z.

What type of machine is the DY-SK-D2-10Z?

It is presented as an intelligent leather punching machine.

What software is mentioned for drawing?

The machine supports drawing directly by AutoCAD and CorelDRAW without mold design.

What punching speed is mentioned on the machine page?

The feature section mentions 500–1100 punches per minute, while the technical table lists (500–900) ×2.

What is the punching range?

The punching range is listed as (600 × 900) ×2.

What hole sizes can the machine handle?

The listed hole diameter range is 0.6 to 13 mm.

What material thickness range is shown?

The listed thickness of material is 1 to 6 mm.

Does the machine include dust collection?

Yes. It includes an auto dust collecting system to help keep the work environment clean.

What are the main quality points highlighted for punching?

The machine is described as offering high quality punching with no material damage, no material burning, and no bad smell.